22: PhotoImpactX3: (Editing partial shadow photo)

Back up of entries with pictures saved on my 1TB drive

Moderator: sjj1805

Post Reply
User avatar
sjj1805
Site Admin
Posts: 1194
Joined: Fri Oct 27, 2006 12:45 am
operating_system: Windows 10 Pro
motherboard: Hewlett Packard 2AF7
system_drive: C
32bit or 64bit: 64 Bit
processor: 2-90 gigahertz Intel Core i5 4460S
ram: 8 GB
video card: NVIDIA GeForce GT 705
sound card: P40D100-4 NVIDIA High Definition Audio
Hard_Drive_Capacity: 8 TB
Location: Birmingham UK
Contact:

22: PhotoImpactX3: (Editing partial shadow photo)

Post by sjj1805 » Thu Jul 24, 2008 5:45 pm

1.The photo shows partial shadow.
Image

2.If we use \"SmartCurve\", then the whole photo will be too light, but now we need only partial light. We have to add one more editing.
Image

3.Select \"shadow\" in Standard column, then click \"OK\"
Image

4.
Image

5.
Image

6. It will add a new layer and you can do further editing.
Image

7. we can see the original photo (left) and the edited photo (right), for the edited photo, it will enhance light in partial part. If your photo has only partial shadow, you can use this way to improve!
Image

User avatar
sjj1805
Site Admin
Posts: 1194
Joined: Fri Oct 27, 2006 12:45 am
operating_system: Windows 10 Pro
motherboard: Hewlett Packard 2AF7
system_drive: C
32bit or 64bit: 64 Bit
processor: 2-90 gigahertz Intel Core i5 4460S
ram: 8 GB
video card: NVIDIA GeForce GT 705
sound card: P40D100-4 NVIDIA High Definition Audio
Hard_Drive_Capacity: 8 TB
Location: Birmingham UK
Contact:

Post by sjj1805 » Thu Jul 24, 2008 6:09 pm

mg.image

Post Reply