Saturn through my telescope

Notes relating to setting up the Telescope and other topics relating to "The Sky At Night"

Moderator: sjj1805

Post Reply
User avatar
sjj1805
Site Admin
Posts: 1174
Joined: Fri Oct 27, 2006 12:45 am
operating_system: Windows 10 Pro
motherboard: Hewlett Packard 2AF7
system_drive: C
32bit or 64bit: 64 Bit
processor: 2-90 gigahertz Intel Core i5 4460S
ram: 8 GB
video card: NVIDIA GeForce GT 705
sound card: P40D100-4 NVIDIA High Definition Audio
Hard_Drive_Capacity: 8 TB
Location: Birmingham UK
Contact:

Saturn through my telescope

Post by sjj1805 » Sat Jan 22, 2011 2:58 am

It was a grey scale version of the 100x in the image on this link.
I was using a barlowed 6mm eyepiece and an astromaster 130 telescope.

I could also see a number of objects which I think were moons, The cloud kept intervening but I think there were about 5 at one moment in time, but due to the haze I could only see 3 clearly but at least 2 more would fade in/out.
I had the impression there were more but I was having to swap between 3 different eyepieces to get a fix.
32mm - initial alignment
13mm - align again before moving "in" with....
6mm - with and without a barlow.

I noticed that the telrad was getting steamed up due to the very cold (frosty) temperature.
Without a doubt so far this planet is more interesting than Jupiter - though that might change when I get time to start using the filters I recently purchased.

Image

Post Reply