1.Open a new image file and setup it as blow:
2.Please devide into 3 parts, now click Web\\Grid and Partition, then setup it as below, please remember to check the item \"Convert cells to objects\"
3.Now click Show layer manager, you will see there are 3 objects. Please click object-1, then click \"create a layer mask\". Please also do that for object-2 and object-3.
4.Now select the object-1, then right click your mouse, select \"Properties\", it will pop up a new window, please check the item \"Placeholder\". (Attention: if you can't check this item, it means you have to convert the object into image firstly.) Please also do that for object-2 and object-3
5.Now click Share\\Photo Projects, it will open a new window, click Browse and then drag the photo to the template.
6.Click OK and save it as UFP file for further using.
[/img]
15:Corel PhotoImpact X3: [How to design your photo template]
Moderator: sjj1805
- sjj1805
- Site Admin
- Posts: 1194
- Joined: Fri Oct 27, 2006 12:45 am
- motherboard: Hewlett Packard 2AF7
- system_drive: C
- 32bit or 64bit: 64 Bit
- processor: 2-90 gigahertz Intel Core i5 4460S
- ram: 8 GB
- video card: NVIDIA GeForce GT 705
- sound card: P40D100-4 NVIDIA High Definition Audio
- Hard_Drive_Capacity: 8 TB
- Location: Birmingham UK
- Contact:
- sjj1805
- Site Admin
- Posts: 1194
- Joined: Fri Oct 27, 2006 12:45 am
- motherboard: Hewlett Packard 2AF7
- system_drive: C
- 32bit or 64bit: 64 Bit
- processor: 2-90 gigahertz Intel Core i5 4460S
- ram: 8 GB
- video card: NVIDIA GeForce GT 705
- sound card: P40D100-4 NVIDIA High Definition Audio
- Hard_Drive_Capacity: 8 TB
- Location: Birmingham UK
- Contact: