1.The photo shows partial shadow.
2.If we use \"SmartCurve\", then the whole photo will be too light, but now we need only partial light. We have to add one more editing.
3.Select \"shadow\" in Standard column, then click \"OK\"
4.
5.
6. It will add a new layer and you can do further editing.
7. we can see the original photo (left) and the edited photo (right), for the edited photo, it will enhance light in partial part. If your photo has only partial shadow, you can use this way to improve!
22: PhotoImpactX3: (Editing partial shadow photo)
Moderator: sjj1805
- sjj1805
- Site Admin
- Posts: 1194
- Joined: Fri Oct 27, 2006 12:45 am
- motherboard: Hewlett Packard 2AF7
- system_drive: C
- 32bit or 64bit: 64 Bit
- processor: 2-90 gigahertz Intel Core i5 4460S
- ram: 8 GB
- video card: NVIDIA GeForce GT 705
- sound card: P40D100-4 NVIDIA High Definition Audio
- Hard_Drive_Capacity: 8 TB
- Location: Birmingham UK
- Contact:
- sjj1805
- Site Admin
- Posts: 1194
- Joined: Fri Oct 27, 2006 12:45 am
- motherboard: Hewlett Packard 2AF7
- system_drive: C
- 32bit or 64bit: 64 Bit
- processor: 2-90 gigahertz Intel Core i5 4460S
- ram: 8 GB
- video card: NVIDIA GeForce GT 705
- sound card: P40D100-4 NVIDIA High Definition Audio
- Hard_Drive_Capacity: 8 TB
- Location: Birmingham UK
- Contact: